Geared LLC - Road Runner. Please note, the complete bike pictures are for reference only.
You are purchasing a frame and fork only no other components are included unless they are listed. Please message me with the decal color of your choice Red, White, or Blue.Geared's Road Runner frameset is designed to quickly conquer miles of gravel roads. The frame's progressive geometry combines slack head tube angles with a 50 mm offset fork for stability. Road Runner inspired stack and reach numbers help place you in a optimal position for quickly covering long miles over challenging terrain.
Each handmade frame and fork is a custom laminate of T700 and T800 carbon fibers. Each layer is carefully placed for the optimal balance of stiffness and strength.The frame exceeds all ISO testing standards so you can be confident bombing down rough descents. Each frame has three water bottle mounting locations plus rear rack and fender mounts. Each fork has fender mounts at the dropouts and crown. All screws are included with the frame and fork. Giving you the flexibility to set up the Road Runner for whatever adventures you are planning.
Internal cable routing keeps your running gear out of the elements. The hydraulic brakes are hidden in the frame and fork and can be easily installed with a pre-blead caliper and shifter/lever. The mechanical front and rear derailleur cable runs are stopped at the head tube and rear dropout reducing the unnecessary weight of full housing. The frame can easily be set up with Shimano Di2 or SRAM AXS electronic shifting. All cables route to the non-drive side of the head tube and the cable stop hardware is included (please note: lower handlebar positions with mechanical shifting will require additional cable management to avoid the housing becoming hung up on the stem bolts).Each frame set is finished off with your choice of decal color. Please choose from red, white, or blue. It includes the seat collar, and FSA C40 headset. The front derailleur mount can be removed if you are running 1 x gearing. Road plus spacing, 100 mm OLD fork and 142 mm OLD frame, connecting the wheels with included through axles.
SEAT POST SIZE: Ø27.2 mm. SEAT CLAMP SIZE: Ø31.8 mm.
HEADSET SIZE: IS 42 / IS 52 Recommend FSA No. BB SPECIFICATION: Threaded BSA-68 mm.
FRONT DERAILLEUR: BRAZED-ON TYPE (DOWN SWING). MAXIMUM CHAIN RING SIZE: 50 TEETH. THROUGH AXLE SPECIFICATION: 172 mm X Ø12 X 1.5 TPI THRU AXLE TYPE O.
REAR BRAKE SPECIFICATIO: FLAT MOUNT & Ø140 mm ROTOR. REAR TIRE SPECIFICATION: MAXIMUM 700 X 45 (ISO 622 X 45). FRAME WEIGHT WITH ALL MOUNTING HARDWARE AND THROUGH AXLE: 1300 grams.TAPERED STEERER: UPPER 1-1/8" - CROWN RACE 1.5". FRONT BRAKE SPECIFICATIO: FLAT MOUNT & Ø160 mm ROTOR.
FRONT TIRE SPECIFICATION: MAXIMUM 700 X 45 (ISO 622 X 45). FORK WEIGHT WITH ALL MOUNTING HARDWARE AND THROUGH AXLE: 585 grams. Frame and components is governed by the laws of the state of Arizona. It is being provided to the purchaser of the bicycle free of any charge. Frames, fork structures and swing arms are warranted by Geared, L.
Against manufacturing defects in materials and/or workmanship. Paint and or decals that chip, fade, or scratch due to the effects of ultraviolet light (UV), cleaning chemicals, normal wear and tear, weather or outdoor exposure are not warranted. Normal wear items that may need regular replacement such as bearings, screws, derailleur hangers or the like are not warranted. We do not warrant any steel or stainless steel component for corrosion or rust. Components are warranted by Geared, L.
Finishes and or logos that discolor, fade, or scratch due to the effects of ultraviolet light (UV), cleaning chemicals, normal wear and tear, weather or outdoor exposure are not warranted. Normal wear items that may need regular replacement such as bearings, screws, or the like are not warranted.All other components not manufactured by Geared, L. Including but not limited to gears, hardware, suspension parts, pivots, bushings, frame fixtures and finishes (paint and decals), are warranted by the manufacturers of those components. External or internal rust perforation on any steel or stainless steel parts is not covered. Finishes, paint, decals and or logos that chip, discolor, fade, or scratch due to the effects of ultraviolet light (UV), cleaning chemicals, normal wear and tear, weather or outdoor exposure are not warranted.
Frame or component and is not transferable to subsequent owners. It is void if the frame or component has been used for any commercial purpose rental, courier, police, security etc.Or if a trailer of any kind has been attached to it. Damage resulting from normal wear and tear, including the results of fatigue, is not covered. Fatigue damage is a symptom of the frame or component being worn out through normal use.
It is one kind of normal wear and tear, and it is the owner's responsibility to inspect his/her frame or component on a regular basis. Bent components, frames, forks, handlebars, seat posts, pedals, cranks and wheel rims are signs of accidents and/or extreme use, and will not be covered. Damage resulting from improper assembly or maintenance, or from installation of parts and accessories not compatible with a Geared, L. Frame or component, is not covered.Due to product evolution and obsolescence, some components may not be available for older models. In these cases, sourcing and paying for components, if such can be located, is the responsibility of the bicycle's owner. Color match of any replacement part is not guaranteed. ON ITS FRAMES AND COMPONENTS, AND THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION HEREIN. The consumer may also have other legal rights which vary from state to state or country to country. Some states and countries do not allow the exclusion or limitation of incidental or consequential damages or warranties, so the above limitations or exclusions may not apply to you. RELEASE AND WAIVER OF LIABILITY, ASSUMPTION OF RISK AND INDEMNITY AGREEMENT. WARNING CYCLING IS AN INHERENTLY DANGEROUS SPORT! BY PURCHASING THIS BICYCLE FRAME, YOU ARE GIVING UP CERTAIN LEGAL RIGHTS, INCLUDING THE RIGHT TO RECOVER DAMAGES IN CASE OF INJURY (TO PERSON OR PROPERTY) AND/OR DEATH. On behalf of myself (purchaser), my personal representatives, heirs, estate, spouse and assigns; do hereby agree and acknowledge that I. Understand that circumstances may occur in bicycling activities in which the Purchaser participates or any of which may cause the participant to be seriously injured or which may cause participant's death. Understand that bicycling can be a dangerous activity and involves RISKS that may cause SERIOUS INJURY, AND IN SOME CASES, DEATH, regardless of training and/or past performance, which risks include but are not limited to: terrain, darkness, facilities, altitude, temperature, weather; collisions with objects, obstacles, pedestrians, or vehicles; physical exhaustion or dehydration; failure of equipment; severe head or bodily injuries; death, and broken limbs. RELEASE, DISCHARGE AND PROMISE NOT TO SUE Geared, L. And/or any of their respective owners, members, officers, employees and agents (hereinafter the "Releasees"), for any loss, liability, damage, or cost whatsoever arising out of or related to any loss, damage, or injury (including death) to my person or property, including property of others. Release the Releasees from any claim that such Releasees are or may be negligent in connection with my riding experience or ability, including but not limited to, selecting equipment, maintenance, care, fit or adjustment, instruction on riding skills, or conduct concerning bicycling activities. INDEMNIFY AND SAVE HOLD HARMLESS and its Releasees from and against any. Loss, liability, damage or cost they may incur arising out of or in any way connected with either my use of equipment, bicycles, gear or any other items provided or acts or omission of Geared, L. Specifically and knowingly agree that the Purchaser is expressly and irrevocably intending to release Releasees from Releasees' own negligence. I understand that it is my sole responsibility to inspect the bicycle prior to first using it to ensure that it is in proper working condition, and I have the knowledge, training and experience to perform such an inspection; Geared, L. The Purchaser expressly agrees that the foregoing Release and Waiver of Liability, Assumption of Risk and Indemnity Agreement is governed by the State of Arizona and is intended to be as broad and inclusive as is permitted by Arizona law, and that in the event that any portion of this agreement is determined to be invalid, illegal, or unenforceable, the validity, legality and enforcement of the balance of the Agreement shall not be affected or impaired in any way and shall continue in full legal force and effect.
Acknowledge that the agreement is a contract and agree that if a lawsuit is filed against. I waive any and all rights I may otherwise have to a jury trial. I HAVE READ THIS DOCUMENT AND UNDERSTAND THAT IT IS A PROMISE NOT TO SUE AND A RELEASE AND INDEMNITY FOR ALL CLAIMS OF ANY NATURE AGAINST GEARED, LLC, AND/OR ITS OWNERS, OFFICERS, EMPLOYEES, VOLUNTEERS, AND AGENTS. This item is in the category "Sporting Goods\Cycling\Bicycle Frames". The seller is "jcdesigner001" and is located in this country: US.
This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Croatia, Republic of, Malaysia, Brazil, Colombia, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.