LAUF TRUE GRIT CARBON FRAME, CANNONDALE TOPSTONE FORK. THE BOTTOM BRACKET THREADED INSERT HAD TO BE REPLACED BECAUSE THE ORIGINAL INSERT CAME LOOSE.THE SOLUTION IS A WHEELS MANUFACTURING "BB30 OUT" WHICH WAS MACHINED TO FIT THE FRAME OPENINGS AND THEN EPOXIED AND SCREWED TOGETHER (THE RIGHT SIDE SCREWS INTO THE LEFT SIDE INSIDE THE SHELL). THE BODY OF IT IS NOW PERMANENTLY ATTACHED TO THE FRAME BUT YOU CAN STILL CHANGE THE BEARINGS. 24MM BEARINGS FOR SHIMANO FSA INSTALLED, I HAVE 24/22 SRAM BEARINGS ALSO, YOUR CHOICE. I REPAIR CARBON FRAMES AND HAVE DONE THIS REPAIR MANY TIMES IT WORKS GREAT AND I HAVE NEVER HAD A FAILURE. I RODE IT AS PICTURED IN THE LAST PHOTO FOR A COUPLE OF MONTHS. THE INSERT CAN TAKE 24 mm BEARINGS FOR SHIMANO COMPATABLE (I used an EASTON EC90 24mm CRANK) or the SRAM TRUVATIV EQUIVALENT WITH 24 on one side and 22 on the other. I HAVE BOTH, NEW, SO YOU GET YOUR CHOICE OF ONE OR THE OTHER. THE FORK IS A FULL CARBON CANNONDALE TOPSTONE GRAVEL BIKE FORK.
COMPATABLE WITH 12 mm thru axle wheels, thru axles are included. THE SPEC DECAL SAYS WIRELESS FRONT DERAILLEUR SO YOU WILL HAVE TO DRILL A HOLE FOR WIRED FRONT DERAILLEUR AND CABLE MECHANICAL IS PROBABLY OUT OF THE QUESTION.FROMT DERAILLEUR HANGER NOT INCLUDED. I HAD IT BUILT UP 1x11 with mechanical shifters and ran the shift cable housing from the shifter through the frame inner tube to the rear derailleur. It was really easy and worked great.
Has internal rear brake tube also. THE LAST PICTURE SHOWS IT BUILT UP FOR A 6'-2 rider. The item "LAUF TRUE GRIT CARBON FRAME, CANNONDALE TOPSTONE FORK. LARGE" is in sale since Thursday, January 14, 2021. This item is in the category "Sporting Goods\Cycling\Bicycle Frames".The seller is "petecosentino" and is located in Spring Hill, Florida. This item can be shipped to United States, Canada.